Skip to main content
more options

Projects and Goals

Here are some of BACSI's current projects and goals for the immediate future.

  • Reduce the vulnerability of critical building systems. Our campus BACS infrastructure is widely distributed. We have equipment in over 200 buildings and maintain more that 300 networks. Several communication faults in the past few years have pointed out the need the provide more comprehensive and real-time monitoring of remote network conditions. Some of the measures we have taken, or are in the process of taking include:
    • Improve VLAN segregation of critical buildings
    • Provide remote monitoring of VLAN BACnet traffic
    • Provide more flexible and continuous monitoring of traffic in our EMCS computer room
    • Provide dedicated VPN capability for vendors on large projects prior to commissioning
  • Improve EMCS infrastructure. This is an ongoing goal and, in essence, is one of continuous incremental improvement. Some of the specific challenges are:
    • Refine existing EMCS database to allow for easier access to related data items
    • Provide better cross references for each point in the system so that any changes (e.g., a name change) can be more readily tracked and affected graphics, trends and other calculated points can be updated accordingly
    • Develop more systematic training materials for all software tools and building automation systems
    • Make use of VMware virtualization to increase system availability in the face of various outage scenarios
  • Better diagnostic tools for EMCS operators. Significant progress has already been made in this area but there is always room for more. For example, we recently installed monitoring of the individual circuit breakers at all three major campus electrical substations, Kite Hill, Campus Road and Plantations Road. This allows the operators to immediately determine the fault station of the distribution circuits in the event of isolated power outages.
    • Develop "expert system" rules for diagnosing building alarms and suggest possible/likely causes for alarm conditions
    • Continue to improve integration with existing Facilities Services databases
    • Provide improved campus map display with utility overlays and critical values (CW DP, steam pressures, etc.)
    • Color code buildings to show presence of alarms, excessive energy use, etc.
  • Fault Detection and Diagnosis (FDD). We currently have trend or "interval data" for nearly 25,000 BACS points (temperatures, pressures, flows, statuses, etc.) in nearly 2,500 trend displays. We need to be able to automate the process of reviewing these data to determine current or potential problems. Many algorithms are suggested in the literature, for example:
    • Setpoint deviations of controlled variable (amount and duration)
    • Status deviations (device is on/off, should be off/on)
    • Steam or chilled water reduction (lack of sufficient heating or cooling)
  • Improve public access to data. An important goal is to provide the campus community easier access to our BACS data, particulary in the area of energy use. To that end we have developed a freely accessible "portal" at portal.emcs.cornell.edu. The portal provides:
    • Provides electric, steam and chilled water graphs and near real-time values and costs intended to incentivize energy conservation
    • Allows for the download of daily, weekly, monthly and yearly datasets in tab-delimited, comma-separated-value or MS-Excel spreadsheet formats
    We have also partnered with an outside service provider, Lucid, to provide a campus energy dashboard that currently displays data from 50 buildings, a number that will soon be doubled as more energy meters are commissioned. The Lucid dashboard can be viewed at buildingdashboard.net/cornell.
     
  • BACnet. BACnet is a standard data communication protocol for building automation and control networks that has been developed by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) with strong input from BACSI personnel. We use BACnet to network all of our new computerized building monitoring and control systems and have developed the necessary software interfaces to accomplish this objective. We are also continuing to support the on-going ASHRAE effort to maintain and enhance the standard.

More Information

If you have questions about the building automation and control systems at Cornell, please contact the BACSI Team Leader:

Joel Bender
(607) 255-8880

EMCS Control Room

EMCS Operations is located in a control room at the Julius F. Weinhold Chilled Water Plant. The "Bridge" is manned 24/7/365 by at least one operator and the workstations are arranged so that, in the event of a major campus incident, a second operator can join in.

EMCS Map

BACSI and EMCS Operations are both located at the Julius F. Weinhold Chilled Water Plant on Beebe Lake.